 |
TrimLine
Self-adhesive trim strip. Thin self coloured film, fuel resistant permanent adhesive. Pack has 8 widths from 0.5 to 10mm x 2.5 metres. |
|
Tissue SIG
Liteflite Plyspan,Superflite,Silkspan |
|
Tissue Peck Polymers
Japanese & Domestic Tissue |
|
Solite
Iron on plastic film, ultra light for light weight models.
Weighs 20gsm per square metre |
|
Solartrim
Self-adhesive glossy trim film. Very thin and flexible. Just cut to shape and press on - no heat needed. 12 colours. |
|
Solartex
Iron-on Fabric covering, ideal for large & vintage models. Authentic Scale shades.
Comes in 2mtr rolls or per mtr.
Weight 85-95gsm. |
|
Solarfilm Finishing Product
Balsaloc,Etch Primer,Clearcoat |
|
Solarfilm
Iron-on sef-adhesive plastic covering.
Economical, easy to use with good shrinkage.
Weight: 55-60gsm. |
|
SIG Koverall
Lightweight Polyester Based fabric.Shrinks tight with Iron or Heat Gun.
Can be used on almost all R/C models.
Uncoated, use with stix-it & heat to shrink. Seal with Nitrate Dope, then finish of your choice. |
|
Oracover
Polyester Film in a wide range of colours, gives a very professional finish.
Comes in pearl, chrome fluro, transparent & metallic colours. |
|
Litespan
Lite, thin synthetic fibre tissue. Needs Balsa-loc as an adhesive. |
|
Glosstex
High-Gloss two pack paint finish Fabric Covering.
Iron-on self-adhesive, fuel proof.
Weight: 115-125gsm |
|
Easycoat
Polyester Film, iron-on, heat shrink.
10 colours to select from. |
|
Airspan
Needs Balsa-loc as an adhesive. Very light, thin synthetic fibre tissue.
24-28gsm. |
|
Aerokote Lite by SIG
Each roll is 31-1/2 inches wide (800 mm) x 78-3/4 inches (2 meters) long giving you up to 25% more usable covering material than its leading competition. AeroKote Lite(r)'s dry adhesive on the back side of the material is heat activated, causing adhesion and shrinking to a drum tight finish. It is highly fuel proof for both glow fuels and gasoline. |
|
Aerokote by SIG
Each roll is 31-1/2 inches wide (800 mm) x 78-3/4 inches (2 meters) long giving you up to 25% more usable covering material than its leading competition. AeroKote Lite(r)'s dry adhesive on the back side of the material is heat activated, causing adhesion and shrinking to a drum tight finish. It is highly fuel proof for both glow fuels and gasoline. |
|
SIG Fibreglass
SIG has GLASS CLOTH available in four different weights to suit all possible modeling applications. Chemically treated to enhance glue/resin adhesion. This is the finest grade GLASS CLOTH available, manufactured by the largest fiberglass producer in the U.S. |
|
Notify me of updates to this site
|
Adhesives/Glues
